ASTM A192 ASME SA192 Seamless Steel Finned Tube For Heat Exchanger
ASTM A192 ASME SA192 Seamless Steel Finned Tube For Heat Exchanger is widely used in heat exchanger systems for efficient heat transfer. These finned tubes conform to the specifications outlined in the ASTM A192 and ASME SA192 standards, ensuring their quality and performance in demanding heat exchanger applications.
Standard: ASTM A192, ASME SA192
Application:
ASTM A192 ASME SA192 Seamless Steel Finned Tubes are primarily used in heat exchanger systems for efficient heat transfer. They find application in various industries, including:
- Power Generation: These finned tubes are utilized in power plants for heat recovery systems, where they help transfer heat from exhaust gases to water or steam.
- Petrochemical Industry: They are used in petrochemical plants for heat exchange processes, such as condensation and cooling of various fluids.
- HVAC Systems: These finned tubes are employed in heating, ventilation, and air conditioning (HVAC) systems for efficient heat transfer between air and refrigerants.
Types of ASTM A192 Finned Tube for Heat Exchanger
ASTM A192 L Type Finned Tube,
ASTM A192 LL Type Finned Tube,
ASTM A192 KL Type Finned Tube,
ASTM A192 G Type Finned Tube,
ASTM A192 H Type Finned Tube,
ASTM A192 Extruded Type Finned Tube,
ASTM A192 HF Finned Tube,
ASTM A192 Elliptical Finned Tube,
ASTM A192 Stud Finned Tube,
ASTM A192 Serrated Finned Tube,
ASTM A192 U Bending Low Finned Tube,
ASTM A192 Crimped Finned Tube,
ASTM A192 Inner Grooved Finned Tube,
ASTM A192 Longitudinal Finned Tube, etc.
ASTM A192 Finned Tube for Heat Exchanger Quick Details:
Core tube:ASTM A192,ASME SA192 cold-drawn seamless steel tube
Fin type: Solid plain
Fin Tube Type:L Type,LL Type,KL Type,G Type ,H Type ,Extruded Type ,HF,Elliptical Finned Tube,Stud Finned Tube,Serrated Finned Tube,U Bending ,Crimped Finned Tube,Inner Grooved Finned Tube,Longitudinal Finned Tube,etc.
Outer diameter (OD): 16mm Min~50.8mm max.
Tube length: up to 18,000 mm.
Fin height: 16.5mm max.
Fin thickness: 0.4mm~2mm
Fin pitch: 2.1mm minimum (12FPI)
Surface Protection: Both bare ends shall be zinc or aluminum metallized by electrospray arc system coating.
Accessories: Tube support boxes, clamps or spacer boxes (materials: aluminium, zinc and stainless steel).
GB 5310 20G High Pressure Seamless Boiler Tubes / Pipes are widely used in high-pressure boiler systems for the transportation of fluids at elevated temperatures and pressures. These seamless boiler tubes / pipes conform to the specifications outlined in the GB 5310 standard, ensuring their quality and performance in demanding boiler applications.
Chemical Composition:
| Element | Composition Range (%) |
| Carbon (C) | 0.06-0.18 |
| Manganese (Mn) | 0.27-0.63 |
| Phosphorus (P) | 0.035 max |
| Sulfur (S) | 0.035 max |
| Silicon (Si) | 0.17-0.37 |
Mechanical Properties:
| Property | Minimum Value |
| Tensile Strength | 325 MPa |
| Yield Strength | 180 MPa |
| Elongation | 35% min |
| Hardness (HRb) | 77 max |
Product Image
Company Profile
Factory Tour
team introduction
Applications
Product Tags:
|
|
ASTM A192 ASME SA192 Seamless Steel Finned Tube Heat Exchanger Pipe Carbon Steel Seamless Images
|
